TS-6200/6300.

Market Segments & Applications

The TS-6200/6300 series is used in a variety of industrial and manufacturing processes (waterborne systems), including:

• Used for sizing, boiling, printing, dyeing and post-treatment process in the textile industry ( room temperature )
• Used for the production of water-based adhesives and adhesives
• Used for the production of Acrylic Rubber Latex
• Used in plating solution and metal etching solution
• Used for papermaking production and at finishing process ( coating process )
• Used for the production and application of water-soluble ink
• Used for the formulation of industrial detergents and specialty chemicals
• Used for the tanning process
• Used for wastewater treatment

Detailed Description

Product Characteristics. ● Specially designed for defoaming and foam inhibiting in aqueous solutions at room temperature ● High level of economic efficiency ● Suitable for anionic and nonionic surfactant systems ● More convenient to use with low viscosity and good dispersibility ● Excellent stability ● Suitable for strongly alkaline (pH12) conditions

Usage. TS-6200/6300 series is a kind highly effective defoamer and foam inhibitor, which can prevent foam generation by adding a very small amount to the unfoamed aqueous solution in advance. Only 50 to 100 units (or 0.05-0.1g/l) of TS-6200/6300 per million units of blowing agent should be added at the beginning, and the dosage should be adjusted according to the process to achieve the optimum.

Precautions for Use. (1) The emulsion should be stirred properly before use, diluted with cold water or foaming agent solution and used immediately. (2) TS-6200/6300 will be best suppressed when completely dispersed in (3-10 parts) cold water or foaming solution. (3) Use immediately after dilution. If storage is required, a thickener must be added (see "TS-6200/6300 Standard Dilution Procedure" on separate sheet). (4) Do not dilute TS-6200/6300 with hot water. (5) It can be more effective to inhibit the generation of foam, when appropriate amount of foam inhibitor was added before foaming. (6) Do not use too much.

Packaging. Packed in 50Kg, 200Kg plastic-lined drums or by negotiation.

Storage. Stored at room temperature, not close to heat source and not exposed to sunlight. No contact with acid, alkali, salt and can not be stored for a long time after dilution with water. If delamination occurs beyond half a year of storage, within which it would not occur, this product can still be used after mixing well.